Superbolt has solved difficult bolting problems in every major industry. Here you can find a few examples of the thousands of applications utilizing our products. Each case details the bolting problems that existed and how Superbolt products solved them.

If you don't see your particular application here, that doesn't mean we haven't worked on it before. Chances are, we have! Contact us today to discuss your project with our experienced staff.

 

 

common applications

Power Examples:

press pictureDownload the entire brochure here, or look at each application, in depth, below.

 

Press Examples:

press pictureDownload the entire brochure here, or look at each application, in depth, below.

 

 

Compressor Examples:

press pictureDownload the entire brochure here, or look at each application, in depth, below.

 

 

Mining Application Examples:

press pictureDownload the entire brochure here, or view several applications, in depth, below.

 

 

Hydro Bolting Examples:

press pictureDownload the entire brochure here, or view examples, in depth, below.

 

 

Petrochemical Applications:

press pictureDownload the entire brochure here, or look at each application, in depth, below.

 

 

Steel Mill Applications:

press pictureDownload the entire brochure here, or look at each application, in depth, below.

 

 

Other Bolting Applications:

 

 

Navy Bolting Applications:

Superbolt products are utilized on many Navy bolting applications, many of which are classified. The following Navy documents apply to the use of the Multi-Jackbolt Tensioner. Each is available in PDF format, and posted on this site with permission.

• NSTM075 -2.9.4 - Naval Sea Systems Command Technical Manual 075 is the basic fastener manual used throughout the Navy. It is this document that will have the most complete list of currently approved products.

MJBT discussion is found on pages 75-2-55&56, illustration on 75-2-58. Installation instructions on 075-4.7.1 (page 75-4-18 thru 21).

• NSTM 231 letter and unclassified document covering steam turbines and the use of Multi-Jackbolt Tensioners. Contact us to request the document.

• GYD010 - Submarine Fastener Manual - only one paragraph applies to the MJT. It is 2-19 found on page 45 of 172, states that the parts are approved for use subject to temperature limitations, and to see NSTM075 for guidance.

• Newest revision of Navy Standard Drawing 810-1385895 (standard foundation drawing) will have MJTs (Multi Jackbolt Tensioners) incorporated as a acceptable method of bolting.

• ACP649 is a Advanced Change Proposal that applies to the General Specifications for Overhaul.

•NOTE: A&I's 3410 (688 class) and TO144 (726 class) has been signed out. For further information contact Larry Burda.

Questions about either configurations or materials not covered above can be directed to Mr. James Jennings, ISEA for Fasteners, (215) 897-7869, DSN 443-7869, or Email James.c.jennings@navy.mil

Application questions can be directed to Mr. Larry A. Burda, Superbolt*, Marine/Government Programs, (757) 558-2203, (757) 558-2209-FAX, (412) 973-5761-Cell or Email lburda@earthlink.net, or to the "Contact us" link on this website.