Stamping Press
 Problem:
The Press Sticks in a Down Position:
-Must loosen the tie rods to release the press.
-Time consuming, expensive and hazardous 8-12 hours of downtime.
Rebuild,
Repair or Adjustment of Press:
-Thread galling and tie rod damage.
-Requires heating rods, slug wrenches and heavy impact wrenches.
Solution:
Superbolt® Multi-Jackbolt Tensioners:
-Backing off jackbolts loosens press
sufficiently to free it from down positions.
-Jackbolts
used to develop preload in pure tension.
-Requires simple hand tools, eliminating unsafe, time consuming method of tightening
and loosening.
-Greatly reduces installation and removal times required vs. old methods.
-Eliminates thread galling and stud damage.
|